Refrigerator Thermostat & Sensor Repair in Ventura, CA
If your fridge freezes the milk or swings wildly in temperature, the thermostat or a temperature sensor is a likely culprit.

Temperature control problems are subtle — the fridge runs, but food freezes, thaws, or never quite settles. On modern refrigerators a small sensor (thermistor) tells the control board how cold it is, and a single bad sensor can mimic a failed board. A technician measures the sensor before recommending the more expensive part.
Common Symptoms
- The fridge is too cold and freezing liquids
- Temperatures swing widely between too warm and too cold
- The compressor never shuts off
- The displayed temperature doesn't match a thermometer inside
Potential Causes
- A failed thermistor reporting the wrong temperature to the control board
- A stuck or faulty cold control (mechanical thermostat)
- A bad main control board misreading sensor input
- A damaged or misplaced sensor touching the cabinet wall
- A failed defrost terminator keeping the unit in defrost too long
How a Technician Diagnoses & Repairs It
The technician measures the thermistor's resistance across a range of temperatures and compares it to the model's spec chart, tests the cold control for proper open/close behavior, and checks the control board's sensor circuit. Because a single bad sensor can mimic a board failure, the tech confirms the sensor before recommending a board replacement.
Brand & Equipment Considerations
GE, Whirlpool, Samsung, LG, Frigidaire, KitchenAid and Bosch are serviced. Electronic models use thermistors and a main board, while older mechanical units use a cold-control thermostat — the diagnosis differs, so the tech follows the model's wiring diagram.
Experiencing this issue right now? A local technician can help.
(805) 394-3869Frequently Asked Questions
Related Refrigerator Repair Services
Ready to Get Your Refrigerator Working Again?
Call now to connect with a local Ventura refrigerator repair technician. Describe the problem and get help fast.
(805) 394-3869Monday–Friday, 8:00 AM – 6:00 PM